Related Manuals for Eneo Eneo DTR-6008/500CD
Summary of Contents for Eneo Eneo DTR-6008/500CD
- Page 1 Operating Instructions Digital Video Recorder Models: DTR-6008/250CD, DTR-6016/250CD, DTR-6008/500CD, DTR-6016/500CD, DTR-6008/750CD DTR-6016/750CD...
-
Page 3: Safety Instructions
The DVR may only be operated indoors, and must be protected against incursion of water and damp. Care of the DVR ► Never switch on the DVR when damp has penetrated it. In such cases, have the DVR checked by a qualified service engineer. ►... -
Page 5: Table Of Contents
Accessing the PTZ menu Accessing the Setup menu Accessing the Search menu Getting started Checklist for DVR operation Connecting the remote control and DVR Switching on the DVR Switching off the DVR Administration Saving your system setup Loading your system setup... - Page 6 Table of contents Menu descriptions – Setup menu System – Information System – Date/Time System – Storage System – User System – Shutdown System – Log out user1... Network – Network Network – Notification Devices – Camera Devices – Audio Devices –...
-
Page 7: Overview
Requirements for operation ● Digital video recorder DTR connected ● At least 1 camera connected ● At least 1 monitor connected ● Mouse connected, if DVR is to be controlled by mouse Control options ● Front panel ● Remote Control ● Mouse ●... -
Page 8: Connections On The Rear
Connections on the rear Note: Connections optionally for NTSC or PAL operation. VIDEO IN LOOP AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Designation Functions/connections VIDEO IN 1-16 Max. 16 video channels LOOP 1-16 Max. -
Page 9: Front Panel Controls
Front panel controls The following diagram and table set out the controls on the front panel of the DVR: Designation 1 to 16 Menu navigation PANIC Shuttle ring Jog dial POWER NETWORK DISPLAY, SEQUENCE, FREEZE, SPOT, ZOOM, ALARM MENU DTR-60XX... -
Page 10: Key To Controls
Key to controls Function buttons Element Function Change display mode Sequence On/Off ● Freeze On/Off ● Copying recordings in Search menu by pressing and holding down button Spot monitor assignments PTZ camera functions On/Off Zoom On/Off PTZ camera functions Element Function Zoom in Zoom in... -
Page 11: Remote Control Functions
Remote control functions The following diagram and table set out the functions on the remote control: Select System ID SPOT DISPLAY SEQUENCE FREEZE ALARM CAMERA TRIPLEX AUDIO BOOK MARK CLIP COPY FOCUS PRESET ZOOM VIEW MENU ZOOM PANIC DIGITAL VIDEO RECORDER Remote Controller Playback functions Element... -
Page 12: Menu Overview
Menu overview The following illustration shows the structure of the complete menu tree that is accessible using the mouse control: Display Sequence Freeze Zoom... PTZ... Spot Monitor... Camera Previous Group Next Group Edit Group Speed Auto Pan Tour Pattern Device Menu Light Pump Wiper... - Page 13 Menu overview (continued) The following illustration shows the structure of the complete menu tree that is accessible using the mouse control: Setup Menu... Search DTR-60XX System Network Devices Record Event Go to the First Go to the Last Go to the Date/Time... Calendar Search...
-
Page 14: Accessing The Menus
Accessing the menus Accessing the Display menu Requirement: ● The current camera image is shown in full image or quad image. Step Action Open Display menu... Access to submenu via Device/Remote Control Submenu Change Display modes (PIP, 2x2, x, 4x4) Previous/Next Group Edit Group Change position of image-in-image... -
Page 15: Accessing The Setup Menu
Accessing the menus, continued Accessing the Setup menu Requirement: ● The current camera image is shown in full image or quad image. Step Action Open Setup Menu... Result: Prompt for user name and password. Log in as user. User name: admin Password: (blank) Note: Use default access data only for first-time access. -
Page 16: Getting Started
Connecting the remote control and DVR The remote control and DVR can be assigned an ID, because the ID of each DVR in the network must be unique. The DVR will then only respond to the remote control with the matching ID. -
Page 17: Switching On The Dvr
Switching on the DVR Requirement: ● The start-up preparations are complete. Step Action Plug in DVR mains plug. Switch on monitor. Result: System starts up automatically and is ready to use. Switching off the DVR Requirement: ● You have accessed the Setup menu. -
Page 18: Administration
Insert a USB memory stick into one of the USB ports. Export your setup. Specify a file name. Export your setup. Loading your system setup You can load your stored DVR system setup with or without its network configuration. Requirement: ● USB memory stick with stored setup Step Action Insert a USB memory stick into one of the USB ports. -
Page 19: Downloading Software Updates
Shut down the system. Disconnect the mains plug. Push a paper clip into the Reset button (on the rear of the DVR) and hold it there. Plug in the mains plug. Wait for all the LEDs to flash 5 times (about 30 seconds). -
Page 20: Mirroring Of Hard Disks
Administration (continued) Mirroring of hard disks Mirroring of hard disks prevents the loss of records in the event of a hard disk defect. Requirements: ● The Digital Video Recorder has at least 2 or hard disks installed ● The destination hard disk is identical to the source hard disk in type and memory capacity ●... -
Page 21: Determining The Memory Requirement Of A Recording
Administration (continued) Determining the memory requirement of a recording The amount of memory recorded video sequences will take up depends on the following factors: ● Picture quality ● number of images per second ● duration The memory requirement is calculated by this formula: Memory requirement = picture size x duration of recording x images per second Calculation example: CIF resolution (PAL): Picture... -
Page 22: Searching For Recordings
Searching for recordings Find first stored recording Search Go to the First Find last stored recording Search Go to the Last Find recording by date and time Search Go to the Date/Time... Calendar search For each camera the calendar search indicates: ●... -
Page 23: Using Calendar Search
Hours display ● White: Recording available If the date and time on the DVR have been changed (such as when switching to Summer time) there may be multiple recordings for one time from the same camera. They are stored in separate segments. -
Page 24: Using Event Log Search
Using event log search Performing an event log search Step Action Open event log search. Result: The result of the last search is displayed. Define criteria. Confirm input. Result: List of search results is displayed. Select desired entry from list. Search Event Log Search... -
Page 25: Using Text-In Search
Search > Text-In Search... Option... Search Option... Meaning Start date End date Text input devices on which to search for events Type of text input: Any Text-In Product Generic Text Epson Numbers of text elements to search for Text element Makes search case-sensitive... -
Page 26: Using Motion Search
Using motion search Performing a motion search Step Action Display desired camera in single frame. Open motion search. Enter settings for motion search. Confirm input. Result: List of search results is generated. Select desired entry from list. Search Motion Search... Term Symbol From First... -
Page 27: Copying Recordings
Copying recordings Copying recordings to CD or USB memory stick Step Action Find desired recordings. Note: Make a note of the data of the recordings you want to copy. Define settings. Start copying. Result: The recordings are copied. Search Clip-Copy... Term Symbol Data Source... -
Page 28: Menu Descriptions - Setup Menu
WebGuard, same access using Internet Explorer ● RAS (Remote Administration System), independent of Internet Explorer The DVR can be configured so that alarms trigger a notification by e-mail or notify an RAS. Devices menu On the “Devices” menu the connected peripheral devices are configured. Possible peripherals are: ●... -
Page 29: System - Information
● The remote control and DVR must be set to the same ID. ● If the system ID in the DVR is 0, it will respond to the remote control regardless of the remote’s ID. Menu language Version of DVR software... -
Page 30: System - Date/Time 0
Number of entered public holiday Date of each desired public holiday Date/Time Time Sync Meaning Activates synchronisation with time server IP address of time server Synchronisation interval Time of last synchronisation Activates use of the DVR as the time server DTR-60XX... -
Page 31: System - Storage 1
Setup menu (continued) System – Storage On the “Storage” menu the status and usage of the available storage media is displayed. Setup Menu... System Term Symbol Type Capacity Format Information Mirror 1/2 Source Dest. Start... Format Term Symbol Use as Partition Format DTR-60XX... - Page 32 Setup menu (continued) Information Term Symbol Recorded Data From Clear Setup Menu... System Term Symbol Type Disk Bad Temperature S.M.A.R.T. Meaning Start date of recorded data End date of recorded data Delete all recordings Storage Status Meaning Memory type Data carrier status Temperature status Result of S.M.A.R.T.
-
Page 33: System - User
Auto Login Auto Logout Table of possible group access privileges Group access privilege Meaning Shutdown May shut down the DVR Upgrade May install a new firmware version System Time Change May change the time setting Data Clear May delete recording data... -
Page 34: System - Shutdown 4
Setup menu (continued) System – Shutdown Setup Menu... System System – Log out user1... Setup Menu... System Network – Network On the “Network” menu all settings required to ensure network access are made. Setup Menu... Network Term Symbol Transfer Speed Quality Remote Audio Channel Shutdown... - Page 35 ● PPPoE) ● Password Note: Use of modem must not be activated. Address of DNS server Definition of port numbers needed to access the DVR via the RAS software or via WebGuard Network Modem Meaning Enables modem use Note: LAN type ADSL must not be enabled.
- Page 36 DVRNS = Digital Video Recorder Name Service Port for DVRNS Enables NAT (Network Address Translation) use Name by which the DVR is to be registered with the DVRNS server Check DVR name for usability after entering Information from help desk if DVRNS setting correct...
-
Page 37: Network - Notification
Enables notification of an RAS via LAN Number of IP address IP addresses of RAS PCs Number of notification attempts by the DVR in the event of an error Enables notification of an RAS via modem Telephone number of the modem on the notified RAS PC Outside line code for external calls, if DVR’s modem is con-... -
Page 38: Devices - Camera 8
Setup menu (continued) Devices – Camera On the “Camera” menu the cameras are configured. Setup Menu... Devices Term Symbol Title Resolution Setup Menu... Devices Term Symbol Product Port Setup… Camera Meaning Activates the cameras Name of camera Visibility of recordings and camera data depending on user access privileges: Normal All users see all camera data and all recordings... -
Page 39: Devices - Audio 9
Setup menu (continued) Devices – Audio On the “Audio” menu the audio outputs are assigned to the cameras. Setup Menu... Devices Term Symbol Associated Camera Enable Audio-Out DTR-60XX Audio Meaning Number of audio output Assignment of camera Enables all audio outputs... -
Page 40: Devices - Alarm-Out
Meaning Number of schedule entry Day of the week Time range at 15-minute intervals Response in defined period: Event Alarm in response to event Continuous alarm No alarm Enable ● Alarm outputs ● internal beep by DVR Settings Schedule DTR-60XX... -
Page 41: Devices - Display
OSD Margin... DTR-60XX Display Displayed symbol Meaning Activates display of: Remote Control Visible when Zoom mode enabled Visible when DVR operating in a network ● Freeze ● Visible when Sequence mode enabled Displays number of groups, and their ID numbers ●... -
Page 42: Devices - Remote Control
Setup menu (continued) Setup Menu... Devices Term Symbol Mode Interval Event Monitoring On Setup Menu... Devices Term Symbol Channels Devices – Remote Control On the “Remote Control” menu the remote control function is configured. Setup Menu... Devices Term Symbol Port Setup…... -
Page 43: Record - Record
Setup menu (continued) Record – Record On the “Record” menu the basic settings for recordings and their quality are made. Setup Menu... Record Term Symbol Recycle Event Record Dwell Auto Deletion Use Panic Recording Panic Recording Duration Quality DTR-60XX Record Meaning Enables automatic overwriting of the oldest recordings when the hard disk is full... -
Page 44: Record - Schedule
Setup menu (continued) Record – Schedule On the “Schedule” menu the schedule for recording is defined. Setup Menu... Record Term Symbol Schedule On Range Mode Channels Settings Default... Schedule Meaning Enables schedule entries Note: A recording is made only if schedule entries are enabled. Otherwise only panic recording is possible. -
Page 45: Record - Pre-Event
Setup menu (continued) Record – Pre-Event On the “Pre-Event” menu the settings for recording prior to the event are made. Setup Menu... Record Term Symbol Quality Dwell DTR-60XX Pre-Event Meaning Activates the cameras Number of recorded images per second prior to the event Picture quality of the recorded images prior to the event Recording time prior to the event Note: The pre-event recording memory capacity is limited. -
Page 46: Record - Archive
Setup menu (continued) Record – Archive On the “Archive” menu the schedules and settings for archiving are entered. Setup Menu... Record Term Symbol Archive On Schedule Range Archive Data Range From Recycle Archive Meaning Enables the archiving settings Day of week from which to archive recordings Time range Start of archiving, from: Last Archived... -
Page 47: Event - Alarm-In
Setup Menu... > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup Menu... > Devices > Alarm-Out > Schedule Assign and enable notifications:... - Page 48 Setup menu (continued) Setup Menu... Event Term Symbol Spot Monitor Alarm-In Meaning Number of alarm input Select PTZ cameras to record in event of alarm and select the desired settings Select spot monitor on which camera image is displayed in event of alarm Actions 2 DTR-60XX...
-
Page 49: Event - Motion Detection
Setup menu (continued) Event – Motion Detection On the “Motion Detection” menu the motion-sensitive zones are defined and responses to events configured. Setup Menu... Event Term Symbol Sensitivity Zone Min. Blocks Zone View Motion Ignoring Interval Daytime Setup... DTR-60XX Motion Detection Meaning Enables motion detection for the camera Sensitivity of motion detection:... - Page 50 Setup Menu... > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup Menu... > Devices > Alarm-Out > Schedule Assign and enable notifications:...
-
Page 51: Event - Video Loss
Setup Menu... > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup Menu... > Devices > Alarm-Out > Schedule Assign and enable notifications:... - Page 52 Setup menu (continued) Setup Menu... Event Term Symbol Spot Monitor Video Loss Meaning Number of covert camera Select PTZ cameras to record in event of alarm and select the desired settings Select spot monitor on which camera image is displayed in event of alarm Actions 2 DTR-60XX...
-
Page 53: Event - Text-In
Stop Bit Parity Type of text input: Generic Text Epson Character string with which text input must start for the DVR to respond DVR responds to any character Character string with which text input must end for the DVR to respond... - Page 54 Setup Menu... > Record > Schedule Assign and enable ● alarm outputs ● internal beep by DVR These alarm outputs and the internal beep must be enabled within the time slot: Setup Menu... > Devices > Alarm-Out > Schedule Assign and enable notifications:...
-
Page 55: Event - System Event
Setup menu (continued) Event – System Event On the “System Event” menu the self-diagnostics and corresponding messages are configured.. Setup Menu... Event Term Symbol System Check Recording Check Alarm-In Setup… Term Symbol Schedule On Range Interval Setup Menu... Event Term Symbol Disk Bad Notify Disk Almost Full Notify... - Page 56 Disk S.M.A.R.T. S.M.A.R.T. check failed Assign and enable ● alarm outputs ● internal beep by DVR Note: Not possible for system event and panic recording Assign and enable notifications: Mail Modem (not in case of system event) LAN 1 to LAN 5...
-
Page 57: Event - Event Status
Panic Record Panic recording Check Recording On checking the recording On checking the data medium (only if DVR is not operating in Overwrite Disk Almost Full mode) On checking the data medium (only if DVR is not operating in Overwrite... -
Page 58: Webguard - Webwatch Controls
WebGuard – WebWatch controls The following diagram and table set out the functions on the Web Watch: Designation Display Display Function WebGuard Logging out Open Search (WebSearch) ● Date/Time ● IP Address ● User Name Image display modes Change camera name and image aspect ratio Select cameras Image optimisation PTZ camera functions... -
Page 59: Webguard - Websearch Controls
WebGuard – WebSearch controls The following diagram and table set out the functions on the Web Search: Designation Display Display DTR-60XX Function WebGuard Logging out Open Display (WebWatch) Display date/time, IP address and user name Zoom On/Off and image optimisation Change camera name and image aspect ratio Playback functions Image display modes... -
Page 60: Using Webguard
Search and view recorded records Requirements: ● The Internet connection is set up and the WebGuard service is activated. ● A PC with Internet access to the DVR must be available. ● Internet Explorer must be installed on the PC. Using WebGuard Step Action Ask your System Administrator about the current access data. -
Page 61: Specifications Dtr-6008
Specifications DTR-6008 Model EDP No. Video standard Remark Event logs Security against unauthorised Transmission rate Alarm triggering Alarm activation Remote Control Text display interface Monitor display Covert camera mode Time synchronisation System change log Zoom function Playback Post-alarm recording Control interface Activity detection Simplex/Duplex/Triplex/Pen- taplex mode... - Page 62 Specifications DTR-6008 (continued) Model Picture size Hard disk capacity Playback speed Export of picture data Alarm inputs Alarm outputs Alarm reset Alarm messages Pre-alarm recording Recording medium Archiving Menu languages Ethernet port Remote software Ports Power Supply Power consumption Temperature range Housing Colour Dimensions (H x W x D)
-
Page 63: Specifications Dtr-6016
Specifications DTR-6016 Model EDP No. Video standard Remark Event logs Security against unauthorised Transmission rate Alarm triggering Alarm activation Remote Control Text display interface Monitor display Covert camera mode Time synchronisation System change log Zoom function Playback Post-alarm recording Control interface Activity detection Simplex/Duplex/Triplex/Pen- taplex mode... - Page 64 Specifications DTR-6016, continued Model Picture size Hard disk capacity Playback speed Export of picture data Alarm inputs Alarm outputs Alarm reset Alarm messages Pre-alarm recording Recording medium Archiving Menu languages Ethernet port Remote software Ports Power Supply Power consumption Temperature range Housing Colour Dimensions (H x W x D)
-
Page 65: Accessories
250GB hard disk for DLR/DXR/DTR and DCR 71919 500GB hard disk for DLR/DXR/DTR and DCR 71970 CD/DVD Writer DVD+/-RW 48x/18x, CD/DVD 74088 System keyboard with -axis joystick 74092 System keyboard with joystick, 5” monitor 71902 USB mouse for DVR series DXR, DLR DTR-60XX... -
Page 66: Supported Ptz Cameras
Supported PTZ cameras Manufacturer Designation Costar CDC 2500 Dyna Color CDC2400 Chilsung CRD-J6416 Fine CRR-1660s Pelco D-log Dennard Dennard2060 Tokina DMP-122 Dongyang Unitech DRX-500 Dongyang DY-255RXC Sensormatic Delta Dome II/Ultra IV Eneo Fastrax Philips G Basic AutoDome LG Honeywell) GRU604A TK-S576 Sensormatic Ultra VI... -
Page 67: Index
Index Accessories 65 Alarm Configuring inputs 47 Configuring outputs 40 Connecting inputs 8 Connecting outputs 8 Motion Detection 50 Resetting 9 Setting schedule for outputs 40 Setting signal duration 40 Ambient conditions , 62 Archiving Configuring 46 Memory requirement 21, 46 Setting schedule 46 Assigning cameras Alarm-In 47... - Page 68 Index (continued) Getting started Video recorder , 16 Hard disks Mirroring 20, 1 Health Check 55 IP Address 5, 6 Network configuration 5 Memory requirement Archiving 21, 46 Recording 21 Memory type 1 Menu descriptions Search menu 22 Setup menu 28 Menu structure 12 Mirroring of hard disks 20, 1 Modem...
- Page 69 Index (continued) Specifying public holidays Spot Monitor Assigning a camera 42 Connecting 8 Storage media Displaying status 1 Displaying usage 1 Setting automatic overwrite 4 Switching off 17 Switching on 17 System Export setup 29 Import setup 29 Logging out as USER 4 Shutdown 4 System events Configuring 55...
-
Page 70: Notes On Disposal
Recycle the DVR in order to aid the sustainable reuse of material resources. Private users ► Contact the retailer from whom you purchased the DVR or your competent local authority to find out how you can recycle the DVR in an environmentally friendly way. Commercial users ►... - Page 72 eneo® is a registered trademark of Videor Technical E. Hartig GmbH Exclusive distribution through specialised trade channels only. VIDEOR TECHNICAL E. Hartig GmbH Carl-Zeiss-Str. 8 · 622 Rödermark, Germany Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100 www.videortechnical.com Operating Instructions version 11/2007 (V1.0) Subject to technical change without notice.