Record; Encoding Settings - Eneo INR-18N040005A Full User Manual

5.2 - Record

The recording configuration options are available in the Record and Capture menus accessible from the
Main Menu. From here, you can access and change the recording frame rate & resolution and recording
schedule for each camera connected. You can also enable and set a schedule for your NVR to take a
snapshot each time when an event occurs.

5.2.1 - Encoding Settings

This menu allows you to configure the recording video or network transmission picture quality.
Generally, Mainstream defines the recording video quality which will be saved in the HDD; Substream
defines the video quality which is being viewed via remote access, for example web client & CMS/VMS;
Mobile Stream defines the video quality which is being viewed via remote access via mobile devices.
5.2.1.1 - Video Encoding
You're able to configure the encode parameters of mainstream, substream and mobile stream accordingly.
Resolution: This parameter defines how large the recorded images will be. The higher the number, the
greater the detail available. By default, the recording resolution of the camera is auto-selected by your NVR.
FPS: This parameter defines the number of frames per second the NVR will record. By default, the
recording frame rate of the camera is auto-selected by your NVR.
Video Encode Type: It will list the codecs which are supported by the connected camera. The H.265
codec will compress the information more efficiently and provide the best video quality for a given
bandwidth between each camera and your NVR, and H.265+ has more compression rate then H.265. The
other codec is H.264 which will impact the reliability of the connection between each camera and your
NVR due to the higher bandwidth required, and H.264+ has more compression rate then H.264.
Bitrate Control: Select the bitrate level. For a simple scene, such as a gray wall is suitable constant bitrate
(CBR). For more complex scene, such as a busy street is suitable variable bitrate (VBR).
Video Quality: Available for VBR only, you can select the recording quality that will define the variable
bitrate used, from lowest to highest.
Bitrate Mode: If you want to set the bitrate by yourself, then choose User-defined mode. If you want to
select the predefined bitrate, choose Predefined mode.
EN
61