Eneo INR-18N040005A Full User Manual page 154

5.6.3.1 - FTP Schedule
If FTP upload is enabled on your NVR, alarm images or videos would be uploaded 24 hours as default.
You can change the schedule when your NVR to upload the alarm images or videos. For example, you
may only want to receive alarm images or videos during the day but not in the evening. An alternative
schedule can be created for each camera.
1. Select a channel you want to set the schedule.
2. Click on ratio button of the alarm type that you want to upload for:
• Motion: Upload for motion detection alarm images or videos
• IO: Upload for I/O triggered alarm images or videos
• PIR: Upload for PIR detection alarm images or videos
• Intelligent & AI: Upload for Intelligent or AI detection alarm images or videos
3. Using the mouse, click on a square to change or click and drag the mouse over the squares
corresponding to your desired period
4. Repeat step 2 & 3 to set the schedule for other alarm type.
5. The set schedule is valid only for one channel. If you want to use the same recording schedule
for other channels, use Copy function.
6. Click Apply to save your settings.
154