Table of Contents
Advertisement
5.4.2.2.1 - Create Face Profile from Local Storage Device
This section will show how to create face profiles from face images that have been captured and stored
on your NVR.
1 – Click the Edit button
that you would like to create face profiles
for.
2 – From the Group window, click the Import
button, then click the Local Storage Device
button.
3 – Channels: All channels are set to search by
default. You can specify the cameras you
want to search on.
4 – Use the calendar to specify the date range.
5 – Choose the day duration, and then use the
arrow buttons to quickly display face images
from the previous or next day(s).
6 – The search result will be displayed in the face
list automatically. Use the arrow buttons to
display previous or next page of results.
7 – You can narrow the search result by using the
similarity:
• A: First, select the targeted face image(s) from
the search result.
• B: And then set the Similarity value. It is the
face similarity threshold (%). The higher the
number is, the more precise the result will be.
• C: Click Search button, the system will search
for faces with an equal or greater similarity than
the specified value.
• D: If you want to search from other days, choose
the day duration, and then use the arrow
buttons to quickly display face images from the
previous or next day(s).
• E: Tick the checkbox to select individual face
image, or tick Select All to select all face images
in current page of search result.
• F: Once you've selected one or more face
images, click the OK button. The system will go
to profile edit page.
of the group
EN
105
Advertisement
Table of Contents
