Password; Password Generation - Eneo INR-18N040005A Full User Manual

3.3 - Password

Proper configuration of all passwords & other security settings is the responsibility of the installer and/or
end-user.

3.3.1 - Password Generation

For the first time when you run the NVR, you must be required to set your own password immediately in
order to protect your privacy. Please be sure to record your username and password and save them in a
secure place.
Language: Choose an available OSD language
Device ID: Input the device ID in the parentheses.
Default ID is 000000. View more about Device ID on
5.7.1. General.
New Admin Password: To set your own password.
The password must be a combination of 8 to
16 characters, which is combined with at least
2 kinds of different characters from uppercase
letters, lowercase letters, digit numbers and special
symbols.
Confirm Password: Enter the password again.
Unlock Pattern: Select Enable to draw your pattern lock.
Click Apply to confirm your settings. The system
will require to set the password recovery questions
in case you forget the password.
Tick the box of Security Question Configuration,
and then choose 3 questions and input your
answer to each question.
If you tick the box of Certificate of Authorization,
you need to click the Export button to save a
secret key to your USB flash drive. It will help to
reset the password with the secret key in future.
EN
15