Table of Contents
Advertisement
2. For the Admin, you can proceed:
• To change password: The password must
be a combination of 8 to 16 characters,
which is combined with at least 2 kinds of
different characters from uppercase letters,
lowercase letters, digit numbers and special
symbols. Enter your new password again to
confirm, and then click Save to save your new
password. You will be required to input your
old password to authenticate.
• To enable or disable Unlock Pattern: if this
is enabled, you can draw your pattern and
save. You can unlock the NVR by drawing the
pattern when you login the system next time.
• To set the Limitation of Remote Access: this
will limit the maximum number of remote
accesses with this user account at the same
time. Remote accesses include but not
limited to webpage, CMS/VMS, mobile app,
3rd party platform.
3. For a normal user, you can proceed:
• To enable or disable this user.
• To give a user name and password to the
user.
• To set the Limitation of Remote Access. This
will limit the maximum number of remote
accesses with this user account at the same
time. Remote accesses include but not
limited to webpage, CMS/VMS, mobile app,
3rd party platform.
5.7.2.2 - Edit User Permissions
The administrator account is the only account that has full control of all system functions. You can enable
or disable access to certain menus and functions of each user account.
1. Click the Permission button
user you want to configure.
160
of the
Advertisement
Table of Contents
