Roi Function (Single Roi) - IAI GOX-5105M-5GE User Manual

GOX-5105MC-5GE | GOX-8105MC-5GE | GOX-12405MC-5GE | GOX-16205MC-5GE | GOX-20405MC-5GE | GOX-24505MC-5GE
ROI Function (Single ROI)
Related Setting Items:
The ROI (region of interest) function allows you to output images by specifying the areas to scan.
Specify the area to scan by specifying width, height, and horizontal/vertical offset values under
ImageFormatControl.
You can increase the frame rate by specifying a lower height, as the number of lines scanned
decreases. The setting ranges for the ROI function's readable area based on the Binning setting
(BinningHorizontal, BinningVertical, FD2x2BinningMode) are as follows.
Notes:
The Binning Function
l
used for monochrome camera models.
When using this function with
l
OffsetX, and OffsetY settings, and then configure the Image Scaling Mode settings.
When using Decimation Mode, the
l
but may not operate as expected.
Refer to Functions That Cannot Be Used Together
l
Width/OffsetX (Pixels)
Width
Binning Mode
OffsetX
Horizontal Binning
Width (pixels)
FD2x2BinningMode
Horizontal Binning
Offset X
(pixels)
FD2x2BinningMode
ImageFormatControl
(Horizontal/Vertical Binning and FD2x2BinningMode) can only be
Image Scaling Mode
ROI Function (Single ROI)
Binning OFF
96 to [(*A) - OffsetX], 48 to [(*B) - OffsetX],
step 8 step 4
0 to [(*A) - Width], 0 to [(*B) - Width],
step 8 step 4
User Manual (Ver. Tentative) - Main Functions
(Xscale), first, set the Width, Height,
for usage restrictions.
Binning ON
GOX-5105MC-5GE
GOX-8105MC-5GE
GOX-12405MC-5GE
GOX-16205MC-5GE
GOX-20405MC-5GE
GOX-24505MC-5GE
- 64 -
function can be configurable
*A,B = WidthMax
A B
2472 1236
2856 1428
4128 2064
5328 2664
4512 2256
5328 2664