② Direct Mounting (Or Use Mp-46 Tripod Adapter Plate); ③ Lan Cable - IAI GOX-5105M-5GE User Manual

Tentative version

Table of Contents

Cautions:

The maximum performance of the camera may not be realized depending on the lens.

Attaching a lens with a mount protrusion of 9 mm or longer may damage the lens or camera.

② Direct Mounting (or Use MP-46 Tripod Adapter Plate)

When mounting the camera directly to a wall or other device, use screws that match the camera

locking screw holes on the camera (M3: depth 4mm for the lower part, depth 3 mm for the upper part).

Use the supplied screws to attach the tripod adapter plate (lower mounting holes).

Caution:

For heavy lenses, be sure to support the lens itself. Do not use configurations in which

its weight is supported by the camera.

③ LAN Cable

Connect a LAN cable to the RJ-45 connector. The camera supports the following Ethernet standards:

1000BASE-T, 2.5GBASE-T, 5GBASE-T.

Use a LAN cable that is Category 5e or higher (Category 6 recommended).

Use a LAN cable that is an STP cable.

When supplying power via PoE, connect to a PoE-compatible switching hub or a PoE-

compatible network card.

Refer to the specifications of the cable for details on its bend radius.

The longest cable length varies depending on the type of LAN cable and the Ethernet standard. Below,

the table shows the relationship diagram between LAN cable type and Ethernet standard. Correctly

select the LAN cable type according to the Ethernet standard to be used.

1000BASE-T

2.5GBASE-T

5GBASE-T

Caution:

See the

Cat5e

100m

Notes on LAN Cable Connection

User Manual (Ver. Tentative) - Preparation

Cat6/Cat6e

100m

topic as well.

- 23 -

Cat6A

Cat7

100m

Table of Contents