User Set Control - IAI SW-4000T-MCL User Manual

SW-4000T-MCL User Manual (2.0)
Counter and Timer
Control Name
CounterValue [Counter2]
CounterValue [Counter3]

User Set Control

Configure user settings.
Note: Descriptions of each command can also be found in "UserSetControl" (Setting List).
User Set Control
Access
Name
UserSetLoad R/W
UserSetSaveAscii R/W
Short
Access
ASCII
R CV2 0 ~ 4294967295
R CV3 0 ~ 4294967295
Short
Values
ASCII
0: Default
1: User1
LD
2: User2
3: User3
1: User1
SA 2: User2
3: User3
Default
Values
Value
-
-
Default
Value
LD=[Param.]<CR><LF>
LD?<CR><LF>
-
Read the user settings. When selecting 0
(Default), the factory settings are loaded.
SA=[Param.]<CR><LF>
SA?<CR><LF>
-
Save the current setting values as user
settings.
- 100 -
Short ASCII Command List
Example / Description
CV2?<CR><LF>
Display the Counter2's value.
CV3?<CR><LF>
Display the Counter3's value.
Example / Description