To Save User Settings; To Load User Settings - IAI WA-1000D-CL User Manual

■ To save user settings

1
Stop image capture.
2
Expand [User Set Control] and select the save destination ([User Set1] to [User Set3]) in
[User Set Selector].
Note
The factory default setting values are stored in [Default] and cannot be overwritten.
Caution
Settings can only be saved when image capture on the camera is stopped.
3
Select [User Set Save], and click [Execute 'User Set Save' Command].
The current setting values are saved as user settings.

■ To load user settings

1
Stop image capture.
User settings can only be loaded when image capture on the camera is stopped.
2
Select the settings to load (Default, and User Set1 to User Set3) in [User Set Selector].
3
Select [User Set Load], and click [Execute 'User Set Load' Command].
The selected user settings are loaded.
™ The next time the unit is started up, the settings selected in [User Set Selector] will be loaded automatically.
̶ 19 ̶
WA-1000D-CL