Step 7: Save The Settings; To Save User Settings - IAI SW-4000TL-10GE User Manual

SW-4000TL-10GE | SW-4000TL-SFP | User Manual (2.0)

Step 7: Save the Settings

Related Setting Items:
The configured setting values will be deleted when the camera is turned off. By saving current
setting values to user memory, you can load and recall them whenever necessary. You can save
up to three sets of user settings in the camera. (User Set1 to 3)
Note: Changes to settings are not saved to the computer (eBUS SDK for JAI).

To Save User Settings

1. Stop image acquisition.
2. Expand UserSetControl and select the save destination (UserSet1 to UserSet3) in
UserSetSelector.
Note: The factory default setting values are stored in Default and cannot be overwritten.
Caution: Settings can only be saved when image acquisition on the camera is stopped.
UserSetControl
- 32 -
Preparation