Commissioning / Application Testo Sensor Ld Pro; Switch On; Headphone Volume Up / Volume Down; Sensitivity Level - TESTO Sensor LD pro Instruction Manual

Commissioning

8 Commissioning / Application Testo Sensor LD pro

Please first observe the safety instructions in section 3
8.1

Switch on

Press the power button for about 1 second, the power will turn on, and a start-up sequence will appear
on the display. Pressing the button again switches the device off again.
On-Off button, see device components and controls
8.2

Headphone Volume Up / Volume Down

The volume keys increase or decrease the volume in the headphone in 16 levels.
Continuously pressing the button automatically increases / decreases the value.
Volume up / down buttons for headphone volume, see
Please make sure the headphone level is < 50% before putting on the headphones.
8.3

Sensitivity level

When starting a leak detection or after switching on the sensitivity level "Auto" should be selected.
In case of strong noise levels from the environment it can be switched to a manually adjustable gain
level, see chapter 10.4 „Setting of Sensitivity level"
Manual sensitivity level at measurement start: 30 – 90dB
Testo Sensor LD pro - V2.00
device components and controls
Page 14 of 48