24
5. Operation
5.
Operation
This chapter describes the steps that have to be executed
frequently when using the product.
5.1 Connecting a probe
The necessary probes are permanently connected or
integrated. It is not possible to connect any additional
probes.
5.2 Switching the instrument
on / off
Switching the instrument on:
Press
>
- The thermal sensor is heated up (5s).
- Measurement view is opened: The current reading
is displayed, or ----- lights up if no reading is
available.
Switching the instrument off:
Press and hold
>
goes out.
5.3 Switching the display
light on / off
Switching the display light on/off:
The instrument is switched on.
Press
>
.
(for approx. 2s) until the display
.