Setting Up An E-Mail Account; Tutorial; Connecting Probes; Connecting A Cable Probe To The Testo 400 - TESTO 400 Instruction Manual

8 Commissioning
of the measurement. The new company details will only be stored in the PDF
report once a new measurement is carried out. Please also see Section 10.3.4.

Setting up an e-mail account

8.4.6
Click on the E-mail
measuring instrument, so that you can send measurement data reports via e-
mail. See also Section 10.2.

Tutorial

8.5
At the end of the Setup wizard, the tutorial can be launched.
The tutorial can be executed again at any time via the
Information
The tutorial demonstrates the general operation and the most important
functions of the measuring instrument, using brief examples. The detailed
descriptions can be found in the relevant sections.
• Connect cable and Bluetooth
• Display - user interface (see Section 9.1)
• Application menus (see Section 9.4)
• General measurement information (see Section 9.3.1)
• Managing measurement data (see Section 9.6.1)
• Customer management (see Section 9.5)
• Sensor management (see Section 9.7)
• Setting up an e-mail account (see Section 10.2)

Connecting probes

8.6
All probes can be connected or changed while the instrument is
switched on. However, the connection must not be interrupted during a
probe update.

Connecting a cable probe to the testo 400

8.6.1
> Connect the testo 400 to the probe via the TUC slot.

The cable probe is immediately displayed in the sensor management,
in the basic view and in the relevant measurement menu.
20
field to connect an e-mail account to the testo 400
menu.
® probes (see Section 8.6)
Help and