Table of Contents
Advertisement
Safety Considerations
This chapter contains information about the installation and setup of the 5920
UHP Moisture Analyzer.
PN 592047901 Rev YC
Installation and Start-Up
Before beginning the installation of the analyzer and before powering
it up, review and follow all safety information following the Table of
Contents near the beginning of this manual. This information de-
scribes procedures to follow to avoid personal injury and/or damage
to the equipment. All regulatory agency and personnel safety proce-
dures for your jurisdiction must be followed.
Read this entire chapter before installing the 5920 Analyzer. Failure
to do so may impair protection against fire, electric shock and injury
originally provided by this equipment. Do not use this analyzer in a
manner not specified in this manual.
The installation of the analyzer must be in accordance with all of the
customer and local regulatory standards and procedures. There are no
operator-serviceable components inside the analyzer. Refer all servic-
ing to qualified personnel.
This equipment is suitable for use in Class I, Division 2, Groups A thru D
or Non-Hazardous locations only.
Installation and Start-Up
|
2-1
Advertisement
Table of Contents
