Table of Contents
Advertisement
Scheduled Zero
Saving Your Settings
To save settings on the Schedule tab, click Apply.
To save settings and exit the program, click Apply+Exit.
To abort changes you have made, click Cancel+Exit. This will close the Con-
figurator Software program.
PN 592047901 Rev YC
Schedule routine Zero by clicking the Daily, Weekly, or Monthly button.
Never
No Zero cycle will be done. Scheduling fields at the bottom of the box
are not available.
Daily
To run a Zero cycle select this option and then enter the time of day (1
through 24) in the Hour field at the bottom of this group.
The analyzer uses a 24-hour clock. Example: 1:00 PM = 13 hours.
Weekly
To run a Zero weekly, select this option and then select the day of the
week from the drop-down list under Day of the week at the bottom
of this group. You must also enter the time of day (1 through 24) in the
Hour field at which the Zero cycle will begin.
Monthly
To run a Zero monthly, select this option and then enter the numeric
(1 through 28) day of the month in the Day field and time of day (1
through 24) in the Hour field at which the Zero cycle will begin.
|
Controller/Interface
3-21
Advertisement
Table of Contents
