Write Cell Eeprom (L); Quit (Q); Zero (Z); Defined Responses (Slave To Master) - Ametek 5920 UHP User Manual

Write Cell EEPROM (L)

Copy Cell serial number and Cell calibration coefficients into Cell EEPROM.
Example:
Master:
Slave:

Quit (Q)

Zero cycle is terminated immediately and normal operation resumed.
Example:
Master:
Slave:

Zero (Z)

Initiates a Zero cycle.
Example:
Master:
Slave:

Defined Responses (Slave to Master)

There are three (3) possible responses to a communication transfer initiated by
the master. These are a Simple Acknowledge, Acknowledge with Data, and a
Failure message.

Simple Acknowledge

If the received command does not require data to be returned, a simple ac-
knowledge consisting of an ASCII 'A' will be sent.
Example:
Slave:
2-28 | 5920 UHP Moisture Analyzer
>34LB3[CR]
A[CR]
>34QB8[CR]
A[CR]
>34Z??[CR] (Note the use of wildcard in place of checksum)
A[CR]
A[CR]
PN 592047901 Rev YC