Zero Key - Ametek 5920 UHP User Manual

Zero Key

Use the Zero key to define on-demand Zero settings.
Figure 3-3.
Main Menu, Zero key.
Hold Outputs
Adjust Offset
Start Zero
Quit Zero
PN 592047901 Rev YC
ZERO
Enable
Select this function to hold the output at the last valid reading during
a Zero.
Disable
Select this function to allow the output to change during a Zero.
Enable
Select this function to adjust the offset at the end of a Zero cycle.
Disable
Select this function if you do not want to adjust the offset.
This function zeroes the analyzer on demand.
This function aborts a Zero cycle and returns the analyzer to normal opera-
tion.
Hold Outputs
Enable
Disable
Adjust Offset
Enable
Disable
Start Zero
Quit Zero
Controller/Interface
|
3-3