Working From The Device Communication Tab; Configuring Multiple Analyzers; Changing Communication Parameters - Ametek 5920 UHP User Manual

Working From the Device Communication Tab

Configuring Multiple Analyzers

Use the Device Communication tab to set the analyzer's communication
parameters to agree with the PC settings when controlling analyzers in a daisy
chain.

Changing Communication Parameters

•
•
•
•
Figure 3-9.
Device Communications setup
screen.
3-16 | 5920 UHP Moisture Analyzer
For initial setup of PC communication parameters, use the Setup but-
ton on the General tab.
Change the ANALYZER parameter(s) first.
Click Apply to confirm the change. This may cause the analyzer to go off-
line.
Change the PC settings or physical wires/cables.
Reset the analyzer by recycling power.
PN 592047901 Rev YC