Table of Contents
Advertisement
Working From the 5920 UHP Configurator Software
The Configurator Software provides a graphical user interface to set up param-
eters for either a single analyzer or multiple analyzers.
Configurator Software Installation
1. Insert the Configurator Software CD into CD ROM drive.
2. The installation program should begin to run immediately. If it does not
3. Follow the instructions on the subsequent screens to complete the instal-
3-12 | 5920 UHP Moisture Analyzer
Although you can set and view parameters for multiple analyzers
using the 5920 Configurator Software, you can only work with one
analyzer at any time.
start automatically, click RUN... from the Windows Start menu. Type the
drive letter, followed by a colon (:) and a backslash (\) and the word "setup.
exe" (d:\setup.exe) and click OK to start the installation program.
lation. When you get to the Setup Complete screen, click Finish to com-
plete the installation. The default location for the 5920 software is in the
AMETEK, Inc. folder.
Turn off all power saving modes.
PN 592047901 Rev YC
Advertisement
Table of Contents
