Saving Analyzer Configuration Settings - Ametek 5920 UHP User Manual

Live Data check box
Status message field
Serial Numbers

Saving Analyzer Configuration Settings

To save all of the settings made on the General tab, click Apply.
To save settings and exit the program, click Apply+Exit.
To abort changes you have made, click Cancel+Exit. This will close the Con-
figurator Software program.
PN 592047901 Rev YC
Checked
The system connects to and uses live data from the analyzer.
Not checked
The system uses demonstration data.
Indicates if the analyzer is on-line, off-line, or in demo mode.
On-Line
The PC and analyzer are connected and communicating properly.
Off-Line
The Live Data box is checked on the General tab and the connection
is broken or off-line.
Demo Mode
The Live Data box is not checked on the General tab. No analyzer is
connected through the serial port. This allows you to exercise program
options without communication with the analyzer.
The analyzer name and analyzer software version are displayed on the first
line in the upper right-hand corner. The analyzer serial number and sen-
sor serial number are also displayed.
In the lower right-hand corner, above the Help button, is the Configurator
Software version number.
|
Controller/Interface 3-15