Table of Contents
Advertisement
Environmental Requirements
•
•
•
•
•
•
Electrical Requirements
The 5920 Moisture Analyzer must be installed in a general purpose area. It
does not have an On/Off power switch so power must be applied though a
circuit breaker switch at the AC source.
General Purpose Installation:
•
PN 592047901 Rev YC
10 °C to 30 °C (50 °F to 86 °F)
90 % RH maximum, non-condensing
IEC Pollution Degree 2
IEC Installation Category II
Maximum elevation 2,000 meters (6560 feet)
Indoor use only, IEC 529; IP40
Power connection can be made using a power cord terminated with a lo-
cally approved wall socket plug, or the analyzer can be hard-wired.
Installation and Start-Up
|
2-5
Advertisement
Table of Contents
