Configuring The 5920; Working From The General Tab - Ametek 5920 UHP User Manual

Configuring the 5920

This section provides instructions for setting up your operating parameters us-
ing the Configurator Software.

Working From the General Tab

Use the General tab to view the current configuration and define parameters
for the analyzer and for PC communications (Figure 3-7).
Figure 3-7.
General tab Configurator
software.
PC Communications Setup Options
Figure 3-8.
PC Serial Communications
setup screen.
PN 592047901 Rev YC
After initial setup, any changes to the analyzer communications
parameters must be made using the Device Communications tab.
These changes must be made before you make any changes to the
computer serial port settings.
Displays information that has been configured from the Serial Port Con-
figuration dialog box.
Click the Setup button to configure PC Communications. The Serial Port
Communication screen opens (Figure 3-8).
|
Controller/Interface 3-13