Tools, Equipment, And Supplies Required For Installation - Ametek 5920 UHP User Manual

Unpacking and Inspecting the Equipment
Remove any packing material from the 5920 UHP Moisture Analyzer ship-
ping crate. Check for damage. If equipment is damaged, notify the carrier and
contact AMETEK (https://www.ametekpi.com/customersupport/aftermarket)
immediately if parts are missing or damage is found, and to verify if damaged
parts will require replacement prior to safely installing and operating the ana-
lyzer/equipment.
Tools, Equipment, and Supplies Required for
Installation
To install the analyzer you need the following tools, equipment, and supplies:
•
•
•
•
•
•
•
•
2-4 | 5920 UHP Moisture Analyzer
Set of open-end wrenches for fittings.
Set of metric hexagonal wrenches.
Set of ball drivers.
Wire cutters, strippers, and crimpers.
Flat blade instrument screwdriver.
Soft, nonabrasive cloth.
Wrist strap (for grounding).
Detergent-based leak detector (Snoop® or another suitable leak detection
agent is permissible).
PN 592047901 Rev YC