Zero Schedule - Ametek 5920 UHP User Manual

Zero Schedule

Use this function to schedule an automatic analyzer Zero cycle.
Figure 3-6.6.
Zero Schedule menu.
Schedule Type
Day of the Week
Day of the Month
Hour
Duration
3-10 | 5920 UHP Moisture Analyzer
Config
Zero Schedule
Choose the preferred Schedule Type:
Never, Daily, Weekly, or Monthly.
Select the day of the week from the list.
Enter the 2-digit value for the day of the month.
Enter the 2-digit value for the hour of the day using a 24-hour clock. Zero is
the starting hour.
Enter the Zero period value in minutes.
AMETEK recommends performing a Zero every 24 hours for the first
month of operation. After this start-up period, the analyzer will have
dried down sufficiently to increase the Zero interval to 1 week. AMETEK
recommends that the duration of the Zero cycle be set to 48 (i.e., 2
hours).
Never
Daily
Weekly
Monthly
Schedule
Type
Sunday
Monday
Tuesday
Day of
Wednesday
Week
Thursday
Friday
Saturday
Day of
Enter Value
Month
Enter Value
Hour
Enter Value
Duration
PN 592047901 Rev YC