Diaphragm Valve
The Diaphragm Valve (AMETEK Part No. 271221001) is located next to the Pres-
sure Regulator on the inlet side of the sampling system. It is attached to the
mounting plate using the Diaphragm Valve mounting bracket.
To remove the Diaphragm Valve:
Follow these instructions to remove the Diaphragm Valve assembly from the
5920 Analyzer.
1. After power has been disconnected, remove the top cover from the ana-
Figure 4-8.
Location of diaphragm valve.
4-12 | 5920 UHP Moisture Analyzer
lyzer and locate the Diaphragm Valve assembly bracket (Figure 4-8).
PN 592047901 Rev YC