Installation And Start-Up; Safety Considerations - Ametek 3050-RM User Manual

Safety Considerations

This chapter contains information about the installation and setup of the
3050-RM Moisture Analyzer.
PN 305892901, Rev S

Installation and Start-Up

Before beginning the installation of the analyzer and before powering
it up, review and follow all safety information following the Table of
Contents near the beginning of this manual. This information de-
scribes procedures to follow to avoid personal injury and/or damage
to the equipment. All regulatory agency and personnel safety proce-
dures for your jurisdiction must be followed.
Read this entire chapter before installing the 3050-RM Moisture Ana-
lyzer. Failure to do so may impair protection against fire, electric shock
and injury originally provided by this equipment. Do not use this
analyzer in a manner not specified in this manual.
The installation of the analyzer must be in accordance with all of the
customer and local regulatory standards and procedures. There are no
operator-serviceable components inside the analyzer. Refer all servic-
ing to qualified personnel.
This equipment is suitable for use in Class 1, Division 2, Groups A
through D or Non-Hazardous locations only.
Installation and Start-Up
|
2-1