Fuses For Engine Electronic Control System - Belarus 922.6 Operator's Manual

- Connect the DL and PTO ECSs fuses if equipped with mechanical control of the GB
gear (standard configuration), which is represented in Figure 2.21.10;
- Connect the DL, PTO and GB gear ECSs fuses and manual gear if equipped with
electrohydraulic control (custom configuration), as is illustrated in Figure 2.21.11.
DL
PTO
1 – real axle DL control circuit fuse with rated value of 7,5 А; 2 – spare fuse with rated
value of 7,5 А; 3 – real PTO control circuit fuse with rated value of 7,5 А; 4 – spare fuse with
rated value of 7,5 А; 5 – spare fuse with rated value of 15 А; 6 – spare fuse with rated value of
7,5 А.

2.21.4 Fuses for engine electronic control system

The EECS fuses are installed in fuse block 2 and 12 (Figure 2.21.12).
Fuse block 2 (Figure 2.21.12) is located above AB 1. Open the tractor hood to get
access to fuse block 2.
Fuse block 12 is located in the cab, to the left of the seat, next to the parking brake
control lever. To get access to fuse block 12 take off caps 10, unscrew two bolts 11 and re-
move cover 14.
Fuses 3, 5 и 7 (Figure 2.21.12) constitute a part of the electrical equipment system.
Wire coloring:
Ж-yellow, К-red,
Р – grey, Ч-black.
Figure 2.21.10 – DL and PTO ECSs fuses
59
922.6-0000010 OM