Disassembling And Assembling The Toothed Belt Cover - Dürkopp Adler D869 e-con Service Instructions Manual

Working basis
3.4.6
Fig. 11: Toothed belt cover (1)
(1) - Screws
(2) - Toothed belt cover
Disassembling the toothed belt cover
To disassemble the toothed belt cover:
1. Loosen screws (4) on the handwheel (4).
2. Remove the handwheel (3).
3. Loosen the screws (1).
4. Remove the toothed belt cover (2); start by disassembling the cover
Service Instructions D869 e-con - 00.0 - 09/2023

Disassembling and assembling the toothed belt cover

①
from below.
④ ③
(3) - Handwheel
(4) - Screws
②
23