Instrument Settings; Brief Introduction; System Information - ADInstruments S7200 Operation Manual

AD INSTRUMENTS
5.

Instrument Settings

5.1. Brief Introduction

Press to enter the setup interface
The system setup screen offers 3 selections,

- System information,

- General settings
- Measurement settings.
5.2. System Information
Press > [About] will display such information as: Hardware and Software
version, as shown below.
Press [About] again to turn to the second page, again to toggle back to the first
page.
There are 2 pages of system information. The first page shows the information of
hardware and software, including the S.N., software version, file system version,
kernel version, boot loader version, hardware version, CA module version, MAC
address, calibration date.
Figure 5-1 System Information - Hardware and Software Version
S7200 TV Signal Analyzer Operation Manual
39