Iptv Measurement - ADInstruments S7200 Operation Manual

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual

6.13. IPTV Measurement

Now, S7200 IPTV function only support MPEG-2 TS over IP method.
Connect Ethernet cable on S7200 RJ-45 port. In home page, tap the soft button
[IPTV], open the IPTV function. The instrument will automatic detect IPTV stream
in network, the detected IPTV stream will be listed at the bottom of the screen.
User can tap one IPTV stream, the test result will display on the screen. If you want
to look at program picture or other video information, you can tap the soft button
[TS MEAS] to open transport stream analysis function.
Figure 6-116 IPTV Measurement Function
Some concepts:
Transport protocol for real-time applications (RTP)
Real-Time Protocol (RTP) is a transport protocol that was developed for streaming
data. RTP includes extra data fields not present in TCP. It provides a timestamp
and sequence number to facilitate the data transport timing, and allows control
of the media server so that the video stream is served at the correct rate for real-
time display. The media player then uses these RTP fields to assemble the received
packets into the correct order and playback rate
217