File Saving - ADInstruments S7200 Operation Manual

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual

5.8. File Saving

Tap the button to store screen snapshots and test results.
If you tap the button in a non-measurement screen, the instrument will ask
"Please enter the file name" and offer a suggested file name. This is your
opportunity to enter a custom file name, if you just press "enter", the file name
will be generated automatically, incrementally from the last automated saved file.
If you tap the button in a measurement screen, the instrument will ask
"Please select the file type": Picture or Data. If you choose "Picture", the
instrument will save the screen snapshot. If you select "data", the active test result
will be saved.
Figure 5-94 Save Screen Snapshot or Test Result
If the user chooses to save the picture, the instrument will ask to confirm the file
name and add a watermark on the picture or not. Figure 5-96 shows the
watermark effect. (File name on the top toolbar, this allows to easily distinguish a
stored trace from any other trace)
Putting a date on the saved picture will increase ease of use when recalling traces
for reports or other reasons.
115