Ping - ADInstruments S7200 Operation Manual

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual

5.3.2. Ping

PING is practical to quickly verify your network connectivity status and speed as
shown in Figure 5-10 below.
Figure 5-10 Ping Result Display
Input the network address or the desired IP address to be tested in the host
address box at the top (for example: www.bing.com), then press the [START]
softkey button to start the network test. Press the [STOP] softkey button to stop
the test. The test information displays in real time in the window.
Parameter Instruction :
"-n" option: means "Packet Count", the number of data packets sent by the
assigned PING order.
"-t": means "Unlimited", if this box is checked, the PING function will be
continuous until the test is interrupted by pressing the stop button.
"-l": means "Packet length", the package length of the PING request
"-I": means "Interval", time interval delay between ping packets, in ms.
45