ADInstruments S7200 Operation Manual page 194

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual
1/2/4, H.264, VC-1 video format and MEPG-1/2/4, AAC audio format. At most,
two audio informations are displayed.
It lists all programs' SID, Service Name, CA, provider, service type, video PID, video
type, Audio1 PID, Audio2 PID, Audio type in the upper part of screen.
In the bottom part of the screen, the video/audio information of selected program
are displayed. The video information include: resolution, frame rate, bit rate,
profile, level, aspect ratio and chroma type. The Audio information include: mode,
layer, bit rate, sampling, profile, channel configuration and emphasis.
These parameters may be different according to the audio/video format. Figure
6-75 show the content. If the parameter is not parsed or the program is an
encrypted program, the '---' will be displayed. If the program has no video
information, a message box with 'No PAT.' will pop up.
S7200 can look at realtime picture, the picture display on the upper left conner of
the screen. At the bottom of the picture, a sliding scale is used to modify volume.
If the program signal is unencrypted, user can directly use S7200 look at program
picture. If the program is encrypted, user must insert the decryption card to look
at program. When TS analysis function display picture, user press the
button, the picture will change to full screen display status, as the
show. User press button again, screen back to TS
Figure 6-76
interface,
182