Table of Contents
Advertisement
AD INSTRUMENTS
S7200 TV Signal Analyzer Operation Manual
Screen Elements description
1. Channel plan name.
2. Center frequency.(CENT)
3. Span. (SPAN)
4. Resolution bandwidth filter selection. (RBW)
5. Video bandwidth filter selection. (VBW)
6. Sweep time. (SWEEP)
7. Detector mode. (DETECTOR)
8. Reference level. (REF)
9. Division scale. (SCALE)
10. Reference scale.
11. Markers.
12. Pre-amplifier On-Off: If pre-amp is on, the icon appears, if pre-amp is off, no
icon is displayed.
13. Spectrum hold: this icon will show if the spectrum sweep is on hold, if signal
is live, no icon shows.
14. Spectrum analysis mode: DFT and FFT.
15. Attenuator. (ATT)
16. Frequency and level of marker A
17. Frequency and level of marker B
18. Delta variation between marker A and B (in frequency and level)
19. Active trace: four traces can be displayed simultaneously by the S7200. Only
one trace is controlled at a time.
20. Test Point Compensation. (TP)
21. Multi-function soft-keys: a button followed by an arrow ">" means there is a
sub-menu available. A button with a bracket "[ ]" means the button offers multi-
functions.
225
Advertisement
Table of Contents
