Dvb-S/S2 Measurement - ADInstruments S7200 Operation Manual

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual

6.10. DVB-S/S2 Measurement

If user want to measure satellite signals. First step need change system switch to
satellite mode, as the Figure 6-58 show. In satellite mode, press button and
connect the satellite antenna RF cable on S7200 RF input port. In Figure 6-59, use
choos the right LNB power supply option and receiver right satellite signal.
Figure 6-58 Satellite Measurement Home Page
Figure 6-59 LNB Power Supply Control
According to choosed satellite channel plan, tap the measure icon, user can look
at measurement results for a transponder on current selected satellite.
S7200 support DVB-S and DVB-S2 signal demodulation. For DVB-S2, S7200 only
170