Gps - ADInstruments S7200 Operation Manual

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual

5.3.7. GPS

S7200 support GPS location function, this function is an option. GPS receiver and
GPS antenna integrate in one module. GPS module use USB cable connect with
S7200.
If S7200 not install GPS module, user also can manually input GPS information and
user can save the manually input GPS information in test results, as the Figure
5-18 show.
Figure 5-18 Manual Input GPS Information
If GPS module connected with S7200, the instrument automatic identify GPS
module. User can find GPS icon on the status bar, as the Figure 5-19 show.
When the three icons cycle display, means the GPS module search
GPS satellite signal.
If status bar only display the icon , means GPS module has been successful
locked the GPS satellite signal and successful acquire the user local position
latitude and longitude information, the information "GpsSTATUS: LOCK(5)" means
GPS module find 5 GPS satellites.
After GPS module location successful, use does any measurement operation and
52