Asi Input And Output Control - ADInstruments S7200 Operation Manual

AD INSTRUMENTS S7200 TV Signal Analyzer Operation Manual

5.6.4. ASI Input and Output Control

ASI input and output port on the right side of the instrument. Choose the ASI input
status valid, the icon display on the title bar. ASI input and output
introduction as the Figure 5-74 and Figure 5-75 show.
If user choose internal transport stream input type (DISK or IPTV), the ASI output
port status is invalid. If user choose the transport stream input type is ASI, the ASI
input port status is valid. The Figure 5-74 shows the relationship.
If ASI output port status is invalid, the ASI output port no signal output. If RF or
ASI input port signal is unencrypted multiplex stream, ASI output port can output
this unencrypted stream. If input signal is encrypted, the system will popup
message"No CA Found!". If user doesn't insert the decryption card, the ASI output
EncropTS option is forbidden.
The Figure 5-75
Valid
ASI Input
Decode/TS Aanalysis
Invalid
Internal TS
Figure 5-74 ASI valid and invalid introduction
ASI output port
Invalid
no signal output
TS Multiplied- TS
ASI output port
Encripted TS CAM
has output signal
Figure 5-75 ASI output option introduction
105