Kia EV9 2023 Owner's Manual page 88

Vehicle safety controls
Non-operating condition(s)
僅 When the vehicle is in R (Reverse)/N (Neutral)/D (Drive) position (Driver's seat)
僅 When the vehicle speed is below 3 km/h (2 mph) (Driver's seat)
僅 When the driver position memory system needs initialization
CAUTION
Do not operate both switches at the same time. It may damage the relaxion comfort seat
system.
NOTE
To save the current passenger seat position as the return position, adjust the passenger
seat to the desired position, then press the front side (1) of the relaxion switch located at
the bottom of the seat cushion 3 times within a 2-second period. This will save the current
position as the return position.
Resetting relaxion comfort seat
Driver's side
Operation
1. Open the driver's side door when the vehicle is stopped and the vehicle in ON position.
2. Move the seat forward as far as possible, and raise the seatback angle as forward as
possible by using the seat adjustment switch.
3.Press the Driver 1 switch (1) from the driver position memory system and push the seat
forward/backward adjustment switch (2) forward at the same time for approximately 2
seconds.
Non-operating condition(s)
僅 When the driver position memory system button is pressed
僅 When the driver's side seat adjustment switch is pressed
僅 When the vehicle speed is above 3 km/h (2 mph)
僅 When the driver's side door is closed
4 20
OMV043028L_4
Seat