Kia EV9 2023 Owner's Manual page 523

Driver assistance guide
WARNING
僅 Never disassemble the detecting sensor or sensor assembly, or apply any impact on it.
僅 If the detecting sensor have been replaced or repaired, we recommend that you have
your vehicle inspected by an authorized Kia dealer/service partner.
僅 Remote Smart Parking Assist may malfunction if the vehicle bumper height or ultrasonic
sensor installation has been modified or damaged. Any non-factory installed equipment
or accessories may also interfere with the sensor performance.
僅 When the ultrasonic sensor is frozen or stained with snow, dirt, or water, the sensor may
not operate until the stains are removed using a soft cloth.
僅 Do not push, scratch or strike the ultrasonic sensor. Sensor damage could occur.
僅 Do not spray the ultrasonic sensors or its surrounding area directly with a high pressure
washer.
Remote Smart Parking Assist settings
Warning Methods
OMV073035L
Warning Methods can be set when the vehicle is in ON position.
僅 Warning Volume: Select [[Settings → Vehicle → Driver Assistance → Warning Meth-
ods → Warning Volume]] on the infotainment system, and adjust the warning volume.
NOTE
僅 Ensure that Warning Methods you have set may apply to the Warning Methods of
other driver assistance systems.
僅 Warning Methods will maintain its last setting even if the vehicle is restarted.
僅 The setting menu may not be available for your vehicle depending on the vehicle fea-
tures and specifications.
Remote Smart Parking Assist 2(RSPA 2)
1 Driver Assistance
2 Warning Methods
3 Warning Volume
7 141