Kia EV9 2023 Owner's Manual page 574

What to do in an emergency
Distributing the sealant
Operation
僅 Immediately drive approximately 7~10 km (4~6 miles, or approximately 10 minutes) to
distribute the tire sealant evenly.
WARNING
僅 Do not leave your vehicle running in a poorly ventilated area for extended periods of
time. Carbon monoxide poisoning and suffocation can occur.
僅 If the tire pressure is below 26 psi(180 kPa), do not drive the vehicle. The tire may cause
accident.
CAUTION
僅 Securely install the sealant filling hose to the valve. If not, sealant may flow backward,
possibly clogging the filling hose.
僅 Do not exceed a speed of 80 km/h (50 mph). If possible, do not fall below a speed of 20
km/h (12 mph). While driving, if you experience any unusual vibration, ride disturbance
or noise, reduce your speed and drive with caution until you can safely pull off of the
side of the road. Call for road side service or towing. When you use the Tire Mobility Kit,
the wheel may be stained by sealant. Therefore, remove the wheel stained by sealant
and have the vehicle inspected at a professional workshop. Kia recommends visiting an
authorized Kia dealer/service partner.
僅 Connecting the 12V battery connector to a 12V battery in an opposite way can damage
the 12V battery and the Tire Mobility Kit. Always follow the instructions.
僅 When detaching the 12V battery connector, always detach the black cable first.
僅 Do not connect another vehicle's Tire Mobility Kit (TMK) to the power outlet or battery
terminal. The unmatched power requirement between the vehicle power outlet and the
tire mobility kit can cause fire or circuit damage within the vehicle and the Tire Mobility
Kit.
8 20
OMV063009_2
Tire Mobility Kit