Kia EV9 2023 Owner's Manual page 436

Driver assistance guide
Changing set speed
1 Current Driving Info
If the speed limit of the road changes during the operation of Manual Speed Limit Assist or
Smart Cruise Control, an arrow in the direction of up or down is displayed to inform the
driver that the set speed needs to be changed. At this time, the driver can change the set
speed according to the speed limit by using the (+) or (–) switch on the steering wheel.
WARNING
僅 If the Offset is adjusted over '0', the set speed will change to a higher speed than the
speed limit of the road. If you want to drive below the speed limit, adjust the Offset
under '0' or use the (–) switch on the steering wheel to lower the set speed.
僅 Even after changing the set speed according to the speed limit of the road, the vehicle
can still be driven over the speed limit. If necessary, depress the brake pedal to reduce
your driving speed.
僅 If the speed limit of the road is under 30 km/h (20 mph), the set speed change function
will not work.
僅 Intelligent Speed Limit Assist operates using the speed unit in the instrument cluster set
by the driver. If the speed unit is set to a unit other than the speed unit used in your
country, Intelligent Speed Limit Assist may not operate properly.
NOTE
僅 For more details on Manual Speed Limit Assist operation, refer to "Manual Speed Limit
Assist (MSLA)" on page 7-47.
僅 For more details on Smart Cruise Control operation, refer to "Smart Cruise Control (SCC)
(if equipped)" on page 7-68.
7 54
OMV073042L_2
Intelligent Speed Limit Assist (ISLA)