Kia EV9 2023 Owner's Manual page 103

Table of Contents

Advertisement

Vehicle safety controls
僅 The angle of the seatback may change when the seat's object detection function is acti-
vated. Press the 3rd row seat fold/unfold switch to operate it once to reset the seatback
angle to the normal angle.
WARNING
僅 Do not intentionally place any part of your body or object within the operating range to
check the object detection function while the third row seat is operating.
僅 For safety, when folding or unfolding the 3rd row seats, make sure that there are no
body parts or objects around, such as hands or heads, before operating. In addition, to
prevent damage to the seat belt, insert it into the storage holder and store the buckle in
the storage area inside the seat before operating it.
僅 If a child seat is installed on the 3rd row seat, remove it and operate it.
僅 If an object is placed on the 3rd row seat cushion, remove the object and operate.
僅 Raise the seatback of the 2nd row seats to avoid interference with the front seats, and if
necessary, move the 2nd row seats forward before operating.
Rear seats (6 seats relaxion)
2nd row seat adjustment
NN_OMV023114_2
Operation
僅 Adjust the switch (1, 2) to the desired position by moving it forward or backward.
僅 Adjust the switch (3) up or down to the desired position.
NOTE
僅 To prevent damage to surrounding parts, the cushion tilt adjustment (3) and seatback
angle adjustment (2) may be restricted depending on the position of the 2nd row seats.
- Adjust the cushion tilt down when the angle of the backrest can no longer be adjusted
backwards. The angle of the seatback can be adjusted a little further back.
- When the cushion tilt no longer goes up, adjust the angle of the seatback forward. You
can raise the cushion tilt a bit more.
僅 For the 2nd row seat, the function of the corresponding control switch may vary
depending on the front/rear position and the angle of the seatback.
- If the seats in the 2nd row are moved forward a lot, the seats move backward when
the seatback angle adjustment switch (2) or the front/rear position adjustment switch
(1) is pushed backward.
1 Forward/backward
2 Seatback angle
3 Cushion tilt
Seat
4
35

Advertisement

Table of Contents
loading

Table of Contents