Kia EV9 2023 Owner's Manual page 18

Electric vehicle guide
V2L power outlet (if equipped)
Operation
1. Connect to the V2L power outlet outlet located in the luggage room area with the EV
button in the ON position.
2. Slide the V2L power outlet cover to the left.
3.Check the operation status through the front indicator of the power outlet.
V2L LCD display messages
Display Message
V2L has ended. Battery level has reached the set value
V2L stopped due to excessive power use
V2L conditions not met
WARNING
僅 Do not touch the V2L connector of the terminal of the vehicle charging hole.
1 12
Indicator
Blue
Red
Green
OMV013003L_2
Standby
No power supply even the power outlet is connected
Normal power supply through the normal connection of
the power outlet
僅 When the high voltage battery level reaches the dis-
charging limit set level
僅 Set the discharging limit lower than the present bat-
tery level.
If you use an electrical appliance that exceeds the maxi-
mum power output the vehicle can supply
If V2L is interrupted for any of the following reasons
僅 V2L connector switch off
僅 V2L connector overheating
僅 Opening the charging door while using the V2L
indoor outlet
Operation Status
Conditions
EV menu