Kia EV9 2023 Owner's Manual page 437

Driver assistance guide
Auto set speed change
When operating Manual Speed Limit Assist or Smart Cruise Control, if the speed set by the
driver is the same as the speed limit on the road, the set speed is automatically adjusted
accordingly the speed limit afterwards. The auto set speed change function operates on
roads with a speed limit of above 70 km/h (45 mph). When the function is activated, the
set speed on the instrument cluster is displayed in green.
WARNING
僅 When driving at a speed lower than the speed limit, set the offset under '0', or press (-)
switch to decrease your set speed.
僅 Even after changing the set speed according to the speed limit of the road, the vehicle
can still be driven over the speed limit. If necessary, depress the brake pedal to reduce
your driving speed.
僅 If the speed limit of the road is under 30 km/h (20 mph), the set speed change function
will not work.
僅 Intelligent Speed Limit Assist operates using the speed unit in the instrument cluster set
by the driver. If the speed unit is set to a unit other than the speed unit used in your
country, Intelligent Speed Limit Assist may not operate properly.
NOTE
僅 For more details on Manual Speed Limit Assist operation, refer to "Manual Speed Limit
Assist (MSLA)" on page 7-47.
僅 For more details on Smart Cruise Control operation, refer to "Smart Cruise Control (SCC)
(if equipped)" on page 7-68.
Intelligent Speed Limit Assist malfunction and limitations
NOTE
僅 The following warning message will appear on the LCD display.
For more details, refer to the malfunction and limitations section of the function.
- Check Driver Assistance System
- Driver Assistance System limited. Camera obscured
Intelligent Speed Limit Assist (ISLA)
OMV053187
7 55