Driver assistance guide
WARNING
The brake control may not operate properly depending on the status of ESC (Electronic
Stability Control).
There will only be a warning when:
僅 The ESC (Electronic Stability Control) warning light is on
僅 ESC (Electronic Stability Control) is engaged in a different function
Blind-Spot Collision-Avoidance Assist malfunction and limitations
NOTE
僅 The following warning message will appear on the LCD display.
For more details, refer to the malfunction and limitations section of the function.
- Check Driver Assistance System
- Check Side View Mirror Warning Light
- Driver Assistance System limited. Radar blocked
Blind-Spot Collision-Avoidance Assist malfunction
Warning message: Check Driver Assistance System
When Blind-Spot Collision-Avoidance Assist is not working properly, the warning message
will appear on the cluster for several seconds, and the master ( ) warning light will
appear on the cluster. If this occurs, have Blind-Spot Collision-Avoidance Assist be
inspected by a professional workshop. Kia recommends that you visit an authorized Kia
dealer/service partner.
Warning message: Check Side View Mirror Warning Light
When the outside rear view mirror warning light is not working properly, the warning mes-
sage will appear on the cluster for several seconds, and the master ( ) warning light will
appear on the cluster. If this occurs, have Blind-Spot Collision-Avoidance Assist be
inspected by a professional workshop. Kia recommends that you visit an authorized Kia
dealer/service partner.
Blind-Spot Collision-Avoidance Assist disabled
Warning message: Driver Assistance System limited. Radar blocked
When the rear bumper around the rear corner radar or sensor is covered with foreign
material, such as snow or rain, or installing a trailer or carrier, it can reduce the detecting
performance and temporarily limit or disable Blind-Spot Collision-Avoidance Assist.
If this occurs, the warning message will appear on the cluster.
Blind-Spot Collision-Avoidance Assist will operate properly when such foreign material or
trailer, etc., is removed, and then the vehicle is restarted.
If Blind-Spot Collision-Avoidance Assist does not operate properly after it is removed, have
Blind-Spot Collision-Avoidance Assist be inspected by a professional workshop. Kia rec-
ommends that you visit an authorized Kia dealer/service partner.
WARNING
僅 Even though the warning message does not appear on the cluster, Blind-Spot Collision-
Avoidance Assist may not properly operate.
僅 Blind-Spot Collision-Avoidance Assist may not properly operate in an area (for example,
open terrain) where any objects are not detected right after the vehicle is turned on, or
7
36
Blind-Spot Collision-Avoidance Assist (BCA)