Kia EV9 2023 Owner's Manual page 134

Vehicle safety controls
Securing a Child Restraint System with the "Top-tether Anchorage"
system
Operation
僅 Route the Child Restraint System seat strap over the seatback.
僅 Connect the top-tether to the top-tether anchorage.
僅 Tighten the top-tether according to the instructions of your Child Restraint System's
manufacturer.
WARNING
Take the following precautions when installing the top-tether:
僅 Read and follow all installation instructions provided with your Child Restraint System.
僅 NEVER attach more than one Child Restraint System to a single ISOFIX top-tether
anchorage. This could cause the anchorage or attachment to come loose or break.
僅 Do not attach the top-tether to anything other than the correct top-tether anchorage. It
may not work properly if attached to something else.
僅 Child restraint anchorages are designed to withstand only those loads imposed by cor-
rectly fitted child restraints. Under no circumstances are they to be used for adult seat-
belts, harnesses, or for attaching other items or equipment to the vehicle.
Suitability of each seating position for belted & ISOFIX Child Restraint
Systems (CRS) according to UN regulations (Information for use by
vehicle users and CRS manufacturers)
僅 Yes : Suitable for fitment of the designated category of CRS
僅 No : Not suitable for fitment of the designated category of CRS
僅 "-": Not applicable
僅 The table is based on LHD vehicle. Except for the front passenger seat, the table is valid for RHD vehicle. For RHD vehicle front pas-
senger seat, please use information for the seating position number 3.
F: Forward facing
4 66
ISOFIX anchorage and top-tether anchorage (ISOFIX
OMV043040L_4
Anchorage System) for children