Kia EV9 2023 Owner's Manual page 109

Vehicle safety controls
Returning relaxion comfort seat
Operation
僅 While the seat is in the relaxion comfort seat position, press the front portion of the
relaxion comfort seat switch (1) for more than approximately 1 second.
The seat cushion and seatback are returned to their original positions in the reverse
order of the relaxion seat operation.
CAUTION
僅 Do not operate both switches at the same time. It may damage the relaxion comfort seat
system.
僅 If you pull the emergency seat folding strap located at the back, the operation of the
relaxation comfort seat function is disabled.
NOTE
To save the current passenger seat position as the return position, adjust the passenger
seat to the desired position, then press the front side (1) of the relaxion switch located at
the bottom of the seat cushion 3 times within a 2-second period. This will save the current
position as the return position.
Resetting relaxion comfort seat
Operation
僅 Press the following buttons at the same time for approximately 5 seconds.
- Pressing the rear portion of the leg support switch (1)
- Pressing the front portion of the cushion tilt adjustment switch (2)
- Pressing back of the seatback angle adjustment switch (3)
Non-operating condition(s)
僅 When the seat adjustment switch is pressed
CAUTION
僅 If initialization stops during initialization, start initialization again. If initialization is inter-
rupted, there may be restrictions on the operation of the relaxation function.
僅 Make sure there are no obstacles around the seat before initialization.
NOTE
After initialization, adjust the seat to fit the occupant.
OMV023155
Seat
4 41