Kia EV9 2023 Owner's Manual page 627

Maintenance
Replacing motor room fuse
Operation
1. Press the EV button to the OFF position and turn all other switches off.
2. Remove the fuse panel cover by pressing the tab and pulling the cover up.
When the blade type fuse is disconnected, remove it by using the clip designed for
changing fuses located in the fuse panel cover. Upon removal, securely insert reserve
fuse of equal quantity.
3.Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the
fuse puller in the fuse panel cover.
4.Push in a new fuse of the same rating, and make sure it fits tightly in the clips. If it fits
loosely, consult a professional workshop. Kia recommends to consult an authorized Kia
dealer/service partner.
CAUTION
After checking the fuse panel in the motor compartment, securely install the fuse panel
cover through the audible clicking sound. If not, electrical failures may occur from water
contact.
Replacing main fuse (multi fuse)
Operation
1. Turn off the vehicle.
2. Disconnect the negative battery cable.
3.Remove the nuts.
4.Replace the fuse with a new one of the same rating.
5.Reinstall in the reverse order of removal.
CAUTION
Visually inspect the battery cap for secure closing. If the battery cap is not securely
latched, the electrical system may be damaged to due influx of moisture into the system.
OMV093011L_4
Replacing components
9 29