Kia EV9 2023 Owner's Manual page 253

Vehicle controls
Operation
僅 Select L (driver's seat) or R (passenger's seat) with the DSM camera control selection
lever (1).
僅 When shifting to the R (Reverse) position, both DSM monitors switch to wide view.
僅 When the DSM camera control select lever (1) is placed in the center position, both DSM
monitors will not switch to wide view.
CAUTION
If there is a problem with the digital side mirror, the screen will not be displayed on the
DSM monitor and the warning message Please check DSM system will be displayed in
the cluster. At this time, check the surroundings with the rear side monitor screen dis-
played on the cluster and the interior mirror when the turn signal is operated, immediately
stop in a safe place, and we recommend that you have your vehicle inspected by an
authorized Kia dealer/service partner.
Adjusting the DSM brightness
僅 When the vehicle is in ON position, select [[Settings → Display → Screen Brightness]]
from the infotainment system.
僅 The brightness can be adjusted automatically or manually.
DSM mirror defogging
僅 Select rear windshield defrosting button when the vehicle is in ON position.
Lighting
Precautions
WARNING
僅 Do not use high beam when there are other vehicles. Using high beam could obstruct
the other driver's vision.
僅 For your safety, change the Settings after parking the vehicle at a safe location.
CAUTION
To prevent the battery from being discharged, do not leave the headlight and interior light
on for a prolonged time while the vehicle is not running.
OMV033065
Adjusting
5 89